Production practice of wool blended yarn

Nov 12, 2023

Leave a message

1.1 Properties of normal temperature and atmospheric pressure cationic (ECDP) polyester
Normal temperature and atmospheric pressure cationic (ECDP) polyester is the addition of three monomers and four monomers in the polyester production process to achieve the purpose of atmospheric pressure easy dyeing modification, so as to solve the problem of high temperature and high pressure dyeing of ordinary polyester fibers, and can achieve atmospheric pressure dyeing below 100℃. ECDP polyester has five advantages compared with ordinary polyester: (1) Energy saving and emission reduction, dyeing time can save 3-4 hours compared with ordinary polyester. ② Low pilling, the same knitted fabric conditions compared with ordinary polyester anti-pilling, pilling grade of at least 0.5; Soft and comfortable, compared with ordinary polyester fiber, the clothing made of the fiber is more soft and comfortable to wear; ④ Hydrophilic moisture conduction, hollow section design, with good moisture conduction performance; ⑤ The fabric dyed with cationic dyes is more delicate.
1.2 Properties of diacetate fiber
Acetate fiber A synthetic fiber made from acetic acid and cellulose by esterification. Acetate fiber is divided into two types of acetate fiber and three acetate fiber. We use type 2 short fiber acetate fiber, which is produced by wet spinning, the production process is pollution-free, and the raw materials used can be recycled. Type 2 short fiber acetate fiber can be dyed with dispersed dye, its moisture absorption performance is good, soft feel, good drape, similar to silk, suitable for making children's clothing, underwear, bathrobe, women's clothing and interior decoration fabrics.
1.3 Performance of mercerized wool
Mercerized wool feels soft, fluffy, good gloss, is a valuable textile raw material, it has very superior performance in many aspects. Wool has good hygroscopic properties, at the same time, it will emit more heat than other fibers when hygroscopic, so that wool has good warmth in a cold and wet environment.

Second, the selection and health of raw materials

The quality of raw materials plays a decisive role in yarn quality, so the reasonable selection and allocation of raw materials is the key factor to ensure yarn quality and maximize spinning profit.
2.1 Selection of mercerized wool
2.1.1 Physical indexes of mercerized wool: In order to ensure yarn quality and cloth surface effect, mercerized wool should be selected with long length, moderate fineness and low content of short hair, coarse hair, colored hair and wool particles. The main physical indexes of mercerized wool are shown in Table 1.
Table 1 Main indexes of mercerized wool

2.1.2 Health treatment of mercerized wool: the surface scales of mercerized wool are close to the hair shaft, with irregular crimp, good fiber fluffiness, poor holding force, and serious electrostatic phenomenon during spinning. In order to improve the spinnability of the wool, we softened the wool: mixed the antistatic agent with warm water in a certain proportion, evenly sprayed on the surface of the wool, closed storage for a certain time and then used to ensure full penetration of the oil agent.
2.2 Selection of cationic polyester and diacetate fibers at normal temperature and pressure
Considering the spinning number and the use of yarn, we choose the following specifications of normal temperature and pressure cationic polyester, diacetate fiber. The physical indicators are shown in Table 2
Table 2 Main indexes of cationic polyester and diacetate fibers at normal temperature and pressure

Third, the mixing method and process flow

3.1 Selection of hybrid mode
In the production of multi-component blended yarn with different characteristics, raw material mixing is the key. If the raw materials are not mixed evenly, it will cause the transverse line after yarn weaving and dyeing, which seriously affects the appearance quality of the fabric. In addition, due to the low breaking strength of diacetate fiber, short fiber is easily produced during carding. Wool is easy to produce static electricity and poor spunability. According to the characteristics of the three raw materials, we choose the mixing method of manual tearing and mixing of cationic polyester, acetate fiber and mercerized wool at normal temperature and pressure, and manually spread it layer by layer according to the proportion of raw materials, paying attention to uniform mixing and accurate proportion.
3.2 Process Flow
All the three raw materials of cationic polyester, acetate fiber and mercerized wool at normal temperature and pressure are manually pulled and mixed →02→36→ Multi-warehouse →A076F winder - FA201B carding machine →FA316 drawing frame →FA423→ZJ1298 spinning frame →NO.21C Murata automatic winder

Four, production and quality control points

4.1 Cleaning process: room temperature and atmospheric pressure cationic polyester/diacetate fiber/mercerized wool
Due to the low breaking strength of acetate fiber and the relatively large proportion in the varieties, it is easy to break when carding. The cleaning process is mainly based on light beating, less beating and mixing. The process principle of "low speed, more opening, less hitting and more mixing" is adopted to reduce the speed of each beater and reduce fiber damage. Process parameters: Cotton grabbing machine beater speed 700r/min, ZFA036 Angle nail beater speed 450r/min, ZFA036 blade beater speed 450r/min, porcupine beater speed 800r/min, ZF1102A beater motor pulley diameter 125mm, ZF1102A beater pulley diameter 200mm, ZFA036 beater speed 450r/min, ZF1102A beater motor pulley diameter 200mm, A076F motor triangle pulley diameter 160mm, A076F beater pulley diameter 250mm. Cotton roll dry weight 370g/m, fixed length 55 yards/roll, fixed weight 13.4kg/ roll.
4.2 Carding process: cationic polyester/diacetate fiber/mercerized wool at normal temperature and pressure
Carding is the key process to control the cotton knot into yarn. It is necessary to ensure that the carding equipment is in good condition, the process spacing is accurate, and the cotton knot in the cotton net is up to standard. Adopt the process principle of "light weight, low speed, less damage fiber, appropriate tension". On the premise of ensuring the dividing effect, the spacing between the needling roller and the feeding board is increased appropriately, and the needling roller, tin and Doffer speed are reduced. Choose a lower cover speed to reduce cover flowers and noil. The tension draft is small, and the thread speed ratio is large, so that the fiber can transfer smoothly from the roller to the tin, and the excessive cotton knot caused by the roller backflowage can be reduced. In order to avoid static electricity generated by friction between the fiber and the metal cloth, and to enable Doffer to transfer the fiber smoothly, the relative humidity of the workshop needs to be increased. Main process parameters: motor pulley diameter 130mm, strip speed 70m/min, barbed roller pulley diameter 240mm, cover plate pulley diameter 315mm, tin - cover plate four-point separation 0.18/ mm, 0.15/ mm, 0.15/ mm, 0.18/ mm, strip weight 18.5g/5m.
4.3 Merging process
In order to ensure the quality and even mixing, the three-pass hybrid process is adopted in the process of combining to improve the dry level of yarn. In order to reduce the phenomenon of winding roller and roller in the spinning process, the roller uses a treated anti-entanglement roller to increase the anti-static performance of the roller. Proper amplification of roller spacing, reasonable draft distribution. In order to improve the fiber structure, increase the straightness and parallelism of the fiber, and to improve the level of yarn yarn. The main process parameters of the combining process are: the draft multiple of the head and back area is 1.89, and the total draft multiple is 7.0; The draft ratio of the end and back area is 1.58, and the total draft ratio is 8.33. The spacing is 13mm*9mm*18mm, and the output speed is 220m/min. The main quality index was 18.5g/5m, and the CV value was 2.26%.
4.4 Roving process
Roving selection of appropriate roving tension can reduce accidental elongation, improve rod length, reduce broken end; The drawing distance in the back area of the roving can be enlarged to reduce the drawing force, reduce the number of thick knots and increase the length of the yarn. Under the premise that the yarn does not produce a hard head, the twist of the roving should be appropriately large to improve the internal quality of the roving; The draft multiple of the back area of the roving should be properly controlled to ensure the dry level of the roving strip. Roving main process parameters: ingot wing speed 850r/min, center distance 39mm*53mm*68mm, mouth 6.5mm, dry weight of roving 4.8g/10m, roving total draft multiple of 6.72 after draft multiple of 2.26 times. Main quality index: CV value of roving bar dry 4.41%.
4.5 Spinning process
The spinning yarn adopts the process principle of large spacing, large back zone draft multiple and low speed. By appropriately increasing the pressure and large roller spacing, the drafting force can be balanced to adapt to the holding force and ensure the stable movement of the fiber during the drafting process to achieve the purpose of improving the bar stem level. Select wire rings on specifications and models; Strengthen the cleaning of drafting areas and winding parts to reduce defects; At the same time, strengthen the maintenance of the spindle and control the production environment to reduce all kinds of broken ends in production, so as to ensure the normal production of spun yarn. The main process parameters of spinning yarn are as follows: double inlet and double outlet horn, back area draft multiple 1.09 times, total draft multiple 56 times, twist factor 370, roller center distance 45mm*65mm, clamping mouth 3.5mm, roller is 965 paint roller. The wire ring uses ED06, and the spindle speed is 15500r/min. The yarn formation index is shown in Table 3
Table 3 Main quality indexes of cationic polyester/diacetate/mercerized wool 60/30/1018.5SJ spinning yarn at normal temperature and pressure
picture
4.6 Winding process
Reduce hairiness, prevent dry deterioration and increase of nodule, the winding process mainly adopts the process principle of small tension and low speed, and reasonable configuration of electric cleaning process and splicing process. Make sure that the channel of the tank tube is smooth and clean, and remove harmful defects. Cotton knot 160%; Short thick section 120%*1.2cm: long thick section 40%*20cm; Details -35%*8.0cm; The joint strength is more than 87% of the original yarn strength.

V. Conclusion

To spin the normal temperature and atmospheric pressure cationic polyester/diacetate/mercerized wool multi-component Siro compact spinning blended yarn, we should pay attention to grasp several key points:
(1) To understand the performance of each fiber: there are many factors affecting the yarn index and spinnability, including the performance and content of each component fiber, yarn structure and spinning process, among which the performance of each component fiber is the basis for determining the index and spinnability of blended yarn, and it is also the key to the health treatment of raw materials with foresight.
(2) The raw materials of each component should be mixed evenly: it is the premise of avoiding color difference and transverse.
(3) Do a good job of cleaning each process: it is very important to strengthen cleaning management in the production process, cleaning to stick, roll, suction, strictly prohibited blowing, beating, so as not to transfer the fiber to the adjacent machine to form yarn defects.
(4) Reasonable process parameters: the reasonable setting of the process is a necessary condition for the smooth production of each process.
(5) Each process equipment is in good condition: prevent sticking, entanglement, blocking phenomenon, to avoid the production of coarse details and weak twist yarn.
(6) Control temperature and humidity: maintaining good temperature and humidity in each process is a key link in production.

 

source:https://mp.weixin.qq.com/s/tOs1WHBdJBYdgrmqx3pJ2A