Say "no" to water pollution in the textile industry
For areas with textile industry as the main industry, water pollution is a problem that must be solved.
"The traditional textile industry is a typical industry with high energy consumption, high water consumption and high pollution, especially in the process of textile dyeing and finishing, which will produce a large amount of wastewater and waste residue. The printing and dyeing waste water contains dyes, sizing agents, auxiliaries, oiling agents, fiber impurities and inorganic salts, with high content of organic pollutants, high alkalinity, large changes in water quality and high chromaticity, which makes it difficult to deal with pollution. Therefore, to fundamentally solve the water pollution caused by textile printing and dyeing, we should not only There are relevant departments to strictly manage the sewage, but also rely on the continuous upgrading of printing and dyeing technology.
"The research and development of anhydrous dyeing technology is to reduce the production of printing and dyeing wastewater from the source." At present, the core of anhydrous dyeing technology developed in China is to use non-aqueous medium for dyeing. "For example, supercritical carbon dioxide dyeing technology can liquefy carbon dioxide into a fluid medium by pressurization, and then reduce the pressure after dyeing in this state. Carbon dioxide can be recovered without water washing in the whole process, and no waste water will be generated. The other is to use organic solvent instead of water as the medium for dyeing. After dyeing, the organic solvent can also be recycled."
These anhydrous dyeing techniques have been applied in practical production. Some companies have industrialized the technological achievements of supercritical carbon dioxide dyeing and established a demonstration line for the industrialization of supercritical carbon dioxide anhydrous dyeing, reducing the dyeing efficiency of textiles from 8 to 12 hours of traditional water dyeing to 3 to 4 hours. Other companies use organic solvent dyeing technology. In the dyeing process, 100% water is saved, 39.3% energy consumption is reduced, the dye fixation rate is more than 97%, and the solvent recovery rate is more than 99%.
Not only can the "dyeing" process save water, but the washing process after dyeing has also undergone changes due to the emergence of new technologies.
Make old bottles and clothes gorgeous
What can a waste plastic bottle do? If thrown away casually, it is garbage that pollutes the environment; But if it is recycled, it may become a dress, a plush toy, or a set of car interior.
Nowadays, the transformation of plastic bottles into chemical fibers is not uncommon in the textile industry. The wide application of efficient preparation technology of recycled polyester fibers promotes the textile industry to develop in a green, low-carbon and recyclable direction.
The raw material for making recycled polyester staple fiber is polyethylene terephthalate (PET). Polyester degradation in the natural environment usually exceeds 50 years, which is easy to cause environmental pollution. At the same time, polyester comes from petrochemical resources. Every ton of pet waste can save 6 tons of oil resources and reduce 3.2 tons of carbon dioxide emissions. "At present, the stock of domestic waste polyester products has exceeded 200 million tons, but its comprehensive recycling rate is still less than 15%. Therefore, the development of renewable polyester fiber industry is of great significance to protect the environment and develop circular economy."
In addition to waste plastic bottles, the recycling of waste textiles is also a major direction for the green development of the textile industry.
The recycled waste textiles, clothing factory leftovers and other initial raw materials are first sorted and crushed, then degraded into small molecular polyester materials through chemical decomposition technology, and finally re made into new high-quality, multifunctional and traceable polyester fibers through distillation, filtration, purification and polymerization.
In March this year, the national development and Reform Commission, the Ministry of Commerce and the Ministry of industry and information technology jointly issued the implementation opinions on accelerating the recycling of waste textiles, which proposed that by 2025, the recycling system of waste textiles will be initially established, the recycling capacity will be significantly improved, the recycling rate of waste textiles will reach 25%, and the output of recycled fiber of waste textiles will reach 2million tons. By 2030, a relatively complete recycling system for waste textiles will be established, with a significantly improved awareness of recycling among producers and consumers, a continuous expansion of high-value utilization ways, and a significant improvement in industrial development. The recycling rate of waste textiles will reach 30%, and the output of regenerated fiber of waste textiles will reach 3million tons.
"In the future, the demand for recycled fiber raw materials will grow rapidly." Sunhuaibin, vice president of China Textile Industry Federation, said that due to the constraints of recycling system, sorting methods, technology and standards, domestic recycled fiber raw materials are mainly PET bottle chips and industrial textile waste. The number of used clothing fabrics from urban and rural residents is small, and the overall efficiency of waste textile recycling is low. "Next, we should speed up the change of the traditional manual identification based sorting method of waste textiles, develop relevant sorting, loosening, recycling equipment, etc., so as to improve the recycling rate of waste textiles and the output of recycled fibers, build a waste textile resource recycling system, and promote the development of related industries. Taking the recycling of waste textiles as a breakthrough will also help to improve the whole waste material recycling system and improve resources Recycling level. " Sun Huaibin said.
Carbon fiber helps save energy and reduce emissions
Last year, the seventh generation maglev train with a speed of 200 kilometers per hour, manufactured by CRRC, was officially unveiled. It has a special technical highlight: the car body material is not the familiar aluminum alloy, but carbon fiber composite.
The textile industry, which is gradually moving towards high-end, intelligent and green, can not only weave cloth, but also weave "everything". In addition to the familiar clothing and home textiles, China has also made many innovative achievements in industrial textiles, providing new possibilities for promoting the realization of the "double carbon" goal - carbon fiber is a typical representative.
Carbon fiber refers to high-strength and high modulus fiber with carbon content of more than 90%. It has extremely high composite strength and high temperature resistance properties. It can be used in aerospace, rail transit and other fields to replace traditional metal products, so as to reduce equipment weight, reduce braking energy consumption, and achieve the effect of energy conservation and emission reduction.
Taking the seventh generation maglev train with a speed of 200 kilometers per hour as an example, after using carbon fiber composites, its weight is reduced by 30% and its passenger capacity is increased by 20%. It not only has high strength, fatigue resistance, corrosion resistance and long service life, but also the lighter body reduces the operating energy consumption and is more energy-saving and environmental friendly.
"In the field of new energy, carbon fiber, as a new lightweight material, also has great room to play." Carbon fiber can be used in wind power, photovoltaic and other new energy equipment, such as making wind power blade girders, carbon carbon composite crucibles for photovoltaic, etc; It can also make hydrogen storage bottles, battery electrodes and other components of hydrogen energy vehicles. "It can be said that carbon fiber is essential to promote the realization of the 'double carbon' goal."
The Ministry of science and technology has recognized it as a "national carbon fiber high-tech industrialization base".
After the development in recent years, China's carbon fiber technology has stepped through the stage of "from nothing to existence", and strided into the development track of "from existence to excellence, stability, quality and efficiency". However, on the whole, the space for technological development is still large, and there is still a gap with the world's leading level. "Carbon fiber technology is an extremely complex technical system. From the quality of raw materials and accessories, to the various processes of precursor and carbonization, a lot of basic research and technology and equipment research and development are needed. In the future, domestic carbon fiber industry should continue to enhance its R & D and innovation capabilities."
At present, China has stepped from a big textile country to a powerful textile country. In terms of technology and application, it is generally at the world's advanced level, and individual technologies are world leaders. As for the lightweight application of high-performance carbon fiber, we need to further strengthen the research and increase the coverage of terminal promotion and application. In the process of green transformation of the textile industry, we should always pay attention to school enterprise cooperation and the transformation of technological achievements. Especially for small textile enterprises, it is very important to work hard in specialization, refinement, characterization, novelty and other aspects. With the help of talent and intellectual resources of scientific research institutions in Colleges and universities, we can concentrate on technological innovation, give full play to the characteristic advantages of subdivisions, and realize green transformation and upgrading.
source:https://www.tnc.com.cn/info/c-001001-d-3723190.html
