Principles of Sunscreen Clothing
According to optical principles, transmittance+reflectance+absorption=100%. Therefore, the higher the reflectance and absorption of ultraviolet rays, the lower the transmittance, and the better the sun protection effect.
principle
The sun protection principle of sun protection clothing is to apply UV protection treatment to the fabric, which involves adding UV absorbers or UV reflectors in various ways (during post-processing or direct spinning) to the fabric, improving the reflection and absorption ability of the sun protection clothing to UV rays, thereby preventing UV rays from passing through the clothing and damaging the human skin.
UV absorber
UV absorbers selectively absorb UVA and UVB, and perform energy conversion to achieve UV shielding. In actual production, benzophenones and benzotriazoles are the most commonly used, with high melting point, low toxicity, poor heat resistance, decomposability at high temperatures, and certain skin irritation.
UV reflector
UV reflectors achieve UV protection by reflecting and refracting external ultraviolet rays. They have high effectiveness, good safety performance, and long-lasting effects. In practical production, metal oxide particles or ceramic powders are most commonly used, such as talc powder, calcium carbonate, zinc oxide, titanium dioxide, etc.
Relevant standards and main indicator requirements
In China's standard system, the main standard for sun protection products is GB/T 18830-2009 "Evaluation of UV Protection Performance of Textiles".
According to the requirements of this standard, when the UPF of the sample is greater than 40 and T (UVA) AV is less than 5%, it can be referred to as a "UV resistant product".
Focus on two indicators
UPF
UPF, also known as UV protection factor, refers to the ratio of the average effect of UV radiation calculated when the skin is unprotected to the average effect of UV radiation calculated when the skin is protected by fabric.
T (UVA) AV
T (UVA) AV refers to the transmittance of sunlight ultraviolet radiation with wavelengths ranging from 315 to 400nm.
The higher the UPF and the lower the UVA, the better the UV protection effect of the fabric. In addition, the label with the highest UPF value for textiles in national standards is 50+, which means UPF>50. Because the difference in sun protection effect is not significant after the UPF is greater than 50.
Common sunscreen clothing fabrics
1. Knitting
Knitted sunscreen clothing fabrics are mainly made of cotton or polyester cotton blends, which have good breathability and comfort, strong moisture absorption, but poor UV resistance.
2. Woven
The woven fabrics for sun protection clothing are nylon, polyester, etc., which are most commonly used in the sun protection clothing market. Nylon dominates in terms of wear resistance and moisture absorption, while polyester has great advantages in comfort functions such as breathability and contact cooling.
How to improve the UV resistance of textiles?
When light shines on the surface of textiles, some are reflected, some are absorbed, and the rest pass through the textiles. Textiles are composed of different fiber materials and have complex surface structures, which can absorb and diffuse ultraviolet radiation, thereby reducing the transmittance of ultraviolet radiation. The scattering and reflection effects vary significantly due to differences in the surface morphology of single fibers, fabric structure, and color depth. Therefore, when studying the UV radiation resistance of textiles, the following factors should be comprehensively considered:
① Fiber type
The absorption and diffuse reflection of ultraviolet ray of different fiber varieties are quite different, which is related to the chemical composition, molecular structure, fiber surface morphology, fiber cross section shape, etc. Natural fiber such as cotton and silk have low absorption capacity to ultraviolet rays, so their ultraviolet protection performance is poor. Among them, cotton fabric is the most easily penetrated fabric, while wool is slightly better; The absorption capacity of synthetic fibers to ultraviolet rays is stronger than that of natural fiber, of which polyester is the strongest. This is because the benzene ring in the polyester structure and the aromatic amino acid in the wool protein molecule have strong absorption to light with a wavelength less than 300nm.
② Fabric structure
The thickness, tightness (coverage or porosity), and structural factors of the original yarn, as well as the number of fibers in the cross-section (related to their slenderness), twist, and hairiness, all have an impact on the UV protection performance of textiles. The thicker the fabric, the greater its tightness, the smaller its pores, and the lower the transmittance of ultraviolet radiation. In terms of fabric structure, woven fabrics are superior to knitted fabrics; Loose fabrics have a low coverage coefficient, especially for some mesh fabrics, where light is limited in shielding and their protective effect is small.
③ Dyes
The change in fabric color is mainly the result of selective absorption of visible light radiation by dyes. Generally speaking, textiles made of the same material dyed with the same dye have a darker color and more absorption of ultraviolet rays, resulting in better UV shielding performance. Dark colored cotton fabrics have significantly better UV protection performance than light colored ones.
④ Post organization
After special post-treatment, its UV resistance will also be enhanced, such as coating treatment, water and oil repellent treatment, etc. On the one hand, the thickness of the fabric will increase, and the porosity of the fabric will also decrease; On the other hand, due to the nature of the finishing agent itself, it may also enhance the shielding effect of ultraviolet radiation. The working principle of the finishing agent is to use ultraviolet shielding agents to treat fibers or fabrics. When light radiates onto the fabric, a small portion passes through the gaps on the fabric, while the vast majority is reflected or selectively absorbed by the ultraviolet shielding agent, converting energy into low energy and releasing it, thereby blocking ultraviolet rays.
⑤ Humidity
The UV resistance of a fabric varies with its moisture content. The higher the moisture content, the worse the UV resistance. This is because when the fabric contains water, its scattering of light decreases.
Comfort requirements for sun protection clothing
1. Breathability
The performance of gas passing through the fabric directly affects the breathability and comfort of sun protection clothing. Sunscreen clothing is required to have good breathability when worn in summer, in order to quickly dissipate heat and avoid making people feel stuffy.
2. Moisture permeability
The performance of gaseous moisture passing through the fabric is an important indicator for evaluating the comfort of sunscreen clothing. In scorching summer days, the human body produces a certain amount of heat and sweats. It is required that sun protection clothing has good moisture permeability to avoid people feeling stuffy and sticky when wearing it.
The breathability and moisture permeability of sunscreen clothing are influenced by various factors such as density, porosity, thickness, and finishing method.
Selection and purchase of sunscreen clothing
One is to look at the label
According to GB/T 18830-2009, the label of sunscreen clothing must include three aspects:
In addition, when importing sunscreen clothing, attention should be paid to whether there is product information labeled in Chinese on the product and its packaging: product name, product model or specification, fiber composition and content, maintenance method, safety category, origin, name and address of the agent, importer or seller, etc; At the same time, keep your eyes open and pay attention to whether the information marked on the outer packaging, hanging tags (certificate of conformity), and durability labels are consistent.
Secondly, selecting fabrics
Nylon and polyester fabrics are the most commonly used in the market; The preferred fabric is soft and elastic, with light weight, soft feel, simple cleaning, and easy and comfortable wearing; Choose fabrics with fine and solid texture, which have less light transmission and better sun protection effect; Avoid purchasing sun protection clothing treated with coating method, as it has poor breathability, is uncomfortable, and the coating is prone to peeling off after washing, resulting in a decrease in sun protection ability.
The third is to choose colors
Dark colored sun protection clothing has better performance in reflecting ultraviolet rays than light colored sun protection clothing. Therefore, when choosing sun protection clothing, it is recommended to choose dark colored sun protection clothing, while black and red series sun protection clothing have relatively better effects.
Fourth, choose a style
There are various styles of sun protection clothing, and you can choose a high collar three-dimensional cut for a better fit, stronger protection, and more convenient activity; The widened brim design can also improve the sun protection effect on the face. In addition, in order to improve the breathability and sweat-wicking performance of sunscreen clothing, you can choose styles with small holes in the armpits and back.
source:https://www.tnc.com.cn/info/c-001001-d-3732389.html
